Publications PPL Home
-Altan M., Osswald
T., "Foam injection molding of polypropylene/zinc oxide nanocomposite
with chemical foaming agent: mechanical properties and morphology", Journal of Testing and Evaluation, vol.47, pp.998-1008, 2019
-Altan M., Demirci M. , "Effect of process parameters on shear layer thickness in injection molded short-glass fiber reinforced polypropylene ", International Polymer
Processıng, no.5, pp.714-720, 2018
-Altan M., Demirci M. , Gümüş B. ,
Kahraman Y., "Effects of process
parameters on the quality of PLA products fabricated by fused
deposition modeling (FDM): surface roughness and tensile strenght", Materials Testing, vol.60,
pp.1-5, 2018
-Altan M., Uysal A., "An Experimental Study on Mechanical Behavior of Nanographene/Epoxy Nanocomposites", Advances In Polymer Technology
, vol.3(4), pp.1061-1066, 2018
-Altan M., Kahraman Y., Gumus B., "Characterization
of hollow glass sphere reinforced epoxy composites: Dynamical mechanical analysis and morphology",
Materials Testing, vol.59,
pp.239-243, 2017
- Altan M., Şen M., "Sac
Metallerin Şekillendirilmesinde Farklı bir Uygulama: Plastik Enjeksiyon
Kalıplamada Akışkan Basıncıyla Alüminyum Sacın Şekillendirilmesi",
Çukurova Üniversitesi Mühendislik Mimarlik Fakültesi
Dergisi, cilt.32, ss.241-252, 2017
-Uysal A., Altan M., "Accuracy estimation in drilling small holes on engineering plastics by a mathematical
approach, ", Proceedings
of the Instituton of Mechanıcal Engineers Part C-Journal Of Mechanical Engineering Science, vol..232, pp..3807-.3813, 2017
-Altan M., Bayraktar M., Yavuz B.,
"Manufacturing polymer/metal
macro-composite structure for vibration damping", Internatıonal Journal Of Advanced
Manufacturing Technology, vol.86,
pp.2119-2126, 2016
-Altan M., Yavuz B., "A Novel Method for
Manufacturing Polymer/Metal
Hybrid Structures", Acta Physica Polonica
A, vol.129, pp.639-641, 2016
-Uysal A., Altan M., "Quality during milling of a glass fiber reinforced polymer composite", MATERIALPRUFUNG, vol.57, pp.767-772, 2015
-Altan M., Uysal A., Altan E., ,
"Effects of process parameters on surface roughness in saw cutting of polypropylene/TiO2 nano composites", Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol.36,
pp.615-621, 2014
-Altan M., Altan E., , "Investigation of burr formation and surface
roughness in drilling engineering plastics", Journal of The Brazilian Society of Mechanıcal Sciences And Engineering, vol.36,
pp.347-354, 2014
-Altan M., "Effects
of Cutting Parameters on Tool Wear in Drilling
of Polymer Composite by Taguchi Method",
International Journal of Advanced Manufacturing
Technology, vol.58, pp.915-921, 2012
-Altan M., Yıldırım H., "Study on Mechanical and Antibacterial Properties of Injection Molded Polypropylene/ TiO2 Nano Composites: Effects of Surface Modification", Journal of Materials Science & Technology, vol.28, pp.686-699, 2012
-Altan M., Yildirim
H., "Effects of compatibilizers
on mechanical and antibacterial properties of injection molded nano-ZnO filled polypropylene", Journal of Composite Materıals, vol.46,
pp.3189-3199, 2012
-Altan M., "Reducing
Shrinkage in Injection Moldings via the
Taguchi, ANOVA and Neural Network Methods", Materıals &Desıgn, vol.32,
pp.599-604, 2010
-Altan M., Yurci
M.E., "Optimization of residual
stresses in the surface regions of the injection moldings",
Polymer - Plastic Technology And Engıneerıng, vol.49, pp.32-37, 2010
-Altan M., Yurci
M.E., “Residual Stress Determination in Injection Molded Virgin and Recycled HDPE Blends: Mechanical Properties and Morphology", E-Polymers, vol.170, pp.1-8, 2008
-Demirci U., Altan M., "Reduction Of Cycle Tıme And Warpage
In Injection Moldıng Of Thin Walled Polypropylene Based Product", 4th CONFERENCE ON ADVANCES IN
MECHANICAL ENGINEERING, ,
-Sönmez M.E., Gumus
B., Demirci M., Altan M., "Improvement in Adhesion of Sandwich Structures With Polypropylene Honeycomb Core Depending on Surface Roughness and Fabrication Method", 4th International Conference on Advances In Mechanical
Engineering, ICAME 2018, İstanbul, TÜRKIYE, ,
pp.1038-1045
-Altan M., Azğüler
O., "Application of Foam Extrusion To Enhance The
Properties Of Polypropylene/Montmorillonite Nanocomposites",
4th CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, ,
-Altan M., Demirci M., "Controlling Fiber Orıentation In Plastic Injection
Molding Depending On Thermal Conditions",
INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING, İSTANBUL, TÜRKIYE,
25-28 Nisan 2017, pp.632-636
-Altan M., Demirci M., Kahraman Y.,
"Optimization of Thermal
Process Conditions on Extruder For Polylactic
Acid", 1. International Conference on Energy and Thermal
Engineering, İSTANBUL, TÜRKIYE, 25 Nisan - 28 Ekim
2017, pp.647-651
-Altan M., Gürkan D., "Development
Of Propertıes Polymer Composıte Foams Obtaıned By Foam
Injectıon Moldıng", Istanbul Internatıonal Conference
On Progres In Applıed Scıence, İstanbul,
TÜRKIYE, 4-6 Ocak 2017, pp.1-8
-Altan M., Demirci M., Temiz İ.C.,
"Effect of Scaffold
Design on Mechanical and Biological Behavior of PLA Fabricated by Fused
Deposition Modeling",
8th International Advanced Technologies Symposium,
ELAZIĞ, TÜRKIYE, 19-21 Ekim 2017, pp.2202-2206
-Altan M., Sönmez M., "Improving Bending Behavior of Sandwich Structures with Polypropylene Honeycomb Cores", 2nd INTERNATIONAL CONFERENCE ON ADVANCES IN
MECHANICAL ENGINEERING, Proceedings Book, 259-261, , 0 2016
-Altan M., Yıldırım H., "Nano Zno Takviyeli Yüksek
Yoğunluklu Polietilenin Antibakteriyel Ve Mekanik Özelliklerinin
Geliştirilmesinde Nano Partikül Modifikasyonun Etkisi",
II.ULUSAL EGE KOMPOZİT MALZEMELER SEMPOZYUMU, TÜRKİYE, Kasım 2013
-Altan M., Yildirim.H,
Uysal A., "Effects
of Micro and Nano Inorganics Particles on the Mechanical Properties of Polypropylene",
Conference of International Journal of Arts & Sciences (IJAS), Italy, , Haziran 2012
-Altan M., Altan E., "Ultra
Yüksek Moleküler Ağırlıklı Polietilenin Matkapla Delinmesinde Delik
Hassasiyetinin Pratik Bir Yöntemle Belirlenmesi", 3.Ulusal Tasarım İmalat
ve Analiz Kongresi, Balıkesir, TÜRKİYE, Ekim 2012
-Altan M., Yıldırım H., "Effects of Nano Zno Particles on Antibacterial and Mechanical Properties of Polypropylene Matrix Composites", 14 th
International Conference on Advances in Materials & Processing
Technologies, İSTANBUL, TÜRKIYE, 13-16 Temmuz 2011, pp.1-7
- Altan M., Yıldırım H., Uysal A.,
"Effects of Micro and Nano Inorganics Particles on the Mechanical Properties of Polypropylene", Academic Journal of Science, no.3,
pp.15-24, 2012
-Altan M., Yıldırım H., "SEBS-g-MA ile Kaplanmış ve Kaplanmamış Nano Boyutlu TiO2 Takviyeli Polipropilen
Matrisli Kompozitlerin
Mekanik Özelliklerinin İncelenmesi", III. Ulusal Polimer Bilim ve
Teknoloji Kongresi, TÜRKİYE, Mayıs 2010
-Altan M., Yıldırım H., "Mechanical and Morphological Properties of Polypropylene and High Density Polyethylene Matrix Composites Reinforced with Surface Modified Nano Sized TiO2 Particles", International Conference on Materials Science and Engineering, , Ekim 2010
-Altan M., Uysal A., "Tensile Properties
of Polypropylene/Metal Oxide
Nano Composites",
International Science and Technology Conference, , Ekim 2010
- Altan M., "Yapay Sinir Ağı
Yöntemi ile Plastik Enjeksiyonda İmal Edilmiş Geri Dönüşümlü HDPE Parçaların
Elastiklik Modülünün Tahmini", Mühendis ve Makine, cilt.59, ss.17-22, 2008
-Altan M., Yurci
M.E. "Plastik Enjeksiyon Yöntemi
İle İmal Edilen Parçalarda Oluşan Kalıntı Gerilmeler I: Kalıntı Gerilmeleri
Etkileyen Faktörler ve Alınan Önlemler", Plastik, cilt.93, ss.100-108,
2007
-Altan M., Yurci
M.E. "Plastik Enjeksiyon Yöntemi İle İmal
Edilen Parçalarda Oluşan Kalıntı Gerilmeler II: Plastik Parçalarda Kalıntı
Gerilmelerin Ölçüm Teknikleri", Plastik, cilt.95, ss.118-125, 2007
-Altan M., Yurci
M.E. "Toz Enjeksiyon Yöntemi ile İmalatın
Karakteristikleri", Plastik, cilt.68, ss.100-104, 2003
-Altan M., Yurci
M.E. "Plastik Enjeksiyon Yöntemi
ile İmal Edilmiş Geri Dönüşümlü Yüksek Yoğunluklu Polietilen Parçalarda Kalıntı
Gerilmelerin İncelenmesi", V. Makine Tasarım ve İmalat Teknolojileri
Kongresi, TÜRKİYE, Ekim 2009
-Altan M., Yurci
M.E. "Plastik Enjeksiyonla İmal
Edilmiş Polistiren Parçalarda Kalıntı Gerilmelerin
Araştırılması", IV. Makine Tasarım ve İmalat Teknolojileri Kongresi,
TÜRKİYE, Kasım 2007
-Altan M., Yurci
M.E. "Hızlı Prototipleme
Teknolojisi ve Stereolitografi", IV.
Mühendislik-Mimarlık Sempozyumu, TÜRKİYE, Eylül 2002
-Altan M., Yurci
M.E. "Silikon Kalıp İmalatında Hızlı Prototip
Teknolojisi Uygulaması", II. Makine Malzemesi ve İmalat Teknolojisi
Sempozyumu, TÜRKİYE, Kasım 2001
-Altan M., Yurci
M.E. "Comparison of Rapid Prototyping Technologies and Manufacturing Characteristics of Built Parts", Vth International
Conference in Modern Technologies in Manufacturing, Turkey, , Ekim 2001